How to clean a laptop screen in easy steps. A laptop screen is probably one of the first things people will notice when they pick up your computer. That is why it is important to keep it as clean as possible. With a few simple tips, you can keep it looking great.
Cleaning Laptop Screen/Display
Make sure it is distilled water first. Tap water usually has trace minerals in it, which will leave mineral deposits on your laptop screen after some time.
If you do not have any, get some from a local store. It will only cost you a few dollars, and you will get many uses out of it over some time. It is good for cleaning various parts of your computer.
Gently buff the area with a clean, dry cotton cloth.
Make sure the cloth doesn’t scratch the screen because this can cause permanent damage. Do this process slowly to avoid having chipping or cracks in your screen later.
After buffing, I like to apply a small amount of silicone over the screen not to get easily scratched.
Spray the screen with the cleaning solution.
Follow the instructions carefully. I prefer to use distilled water because it is chemical-free, and microfiber cloth prevents dust from getting on the surface. When finished, you need to wipe away the dried residue left by the cleaner.
Wipe the cleaner onto a cotton cloth.
Use a very wide circular motion. It’s a good idea to have two clothes over the top, and one can go under the table. Direct spray directly onto the areas where there is dust.
Gently tap on the area and work it in with a paperclip. If the spot is too dirty, I will use the paperclip to scrape it until it is a nice even coat gently.
I usually do this on each side of the screen. As an alternative, I will press the cloth against the glass of the laptop. This method avoids any damage done to the screen.
With a damp cloth
The seventh step in cleaning a laptop screen correctly is to wipe the screen with a damp cloth. Again, I prefer to use a slightly damp cloth over the top and bottom of the screen for easy wiping. Direct dry spray directly onto the spots where there is dust.
Use a microfiber cloth to pull the dirt off of it gently.
Using a wet microfiber cloth, start at the top of the screen and work your way down. Make sure to take note of any spots that have been missed before continuing to the bottom.
I don’t use detergent with my dry cloth as the liquid detergent has no lather capability.
Instead, I apply the detergent with a damp cloth and gently scrub the areas where dust or dirt may have gathered. Be sure to pay special attention to the bottom of the screen where any dried dirt may have collected.
With an aerosol bottle sprayer
The tenth step in cleaning a laptop screen properly is to spray the screen with an aerosol bottle sprayer. Using the sprayer evenly, spray a dime-size amount of cleanser onto the screen.
Try not to leave any screen area remaining dry, as that will cause more dirt to accumulate. Let the cleaner dry for about five minutes before using a dry cloth to wipe it off gently.
Cleaning a laptop screen without damaging it buffering the surface until the desired shine has been achieved. You can do this by utilizing a paper towel or soft cloth. Buffing will help remove any remaining dirt or dust from the surface.
But it will also help increase the shine of the monitor. Buffing is important because it will also prevent any liquid from getting into the internal parts and possibly causing damage to the unit.